Picture of wires from blog In my old leaning house I have one live wire going to the light switch. nothing else is in the switch box. Now I thought that this would be because of the old leaning house that I’m in. However upon asking around it would seem as thought this is common in new constructions as well. This image goes to doesn’t … Continue reading Japanese wiring isn’t automation friendly.
When installing a reed switch or PIR sensor the output of the wires is sometimes cause for concern. In my previous setup the jumper wires came out with power cables. This eventually let to interference of the power with the PIR sensor and caused much ghosting. I had read about people sticking the wires out the top but then realized that they all drilled a … Continue reading Sonoff basic GPIO14 cabling
Received sonoffs a week ago. Been having an inordinate amount of trouble getting the portable arduino ide software working. It would give me various errors with no solution. Installing the full version for some reason made the problems go away. The unstable jumperwire connection I had made to the sonoff didn’t much help. A little electrical tape to wrap the pins helped. Having the whole … Continue reading Sonoffs flashed