In my kitchen I have 2 sonoffs. One in the overhead ceiling lamp (the wall switch didn’t have the ground/earth wire) There is another sonoff attached to a wall mounted “tv” from reusing a pc monitor and a firestick 2nd gen. In order to save a sonoff and place it elsewhere as well as centralizing all the iot in one spot I though I’d take … Continue reading Combining multisensor and sonoff
Part 1 As I await my replacements parts I figured I’d try a few ideas to attempt a recovery of the defective DHT22. The first thing I decided to do was to remove the DHT22 from its partial enclosure. (Sensor part was exposed) Reconnected the sensor node and …. it’s still stuck at 99% humidity. I blew on it and the temperature changed but not … Continue reading DHT22 tinkering.
Running version 0.75.3 for the past 4-6 months because I couldn’t be bothered to update and deal with breaking changes. Versions 0.75.3 to 0.87.1 Everything was running more or less on autopilot. There were some odd things here and there such as my weather entities stopped working and some other minor details. A few days ago I should have done something when I noticed the … Continue reading HASS.io is still not for the masses (SD card fail and forced migration 0.75.3 -> 0.87.1)
Sunshine… I thought that this movement false positive was only a cheap ip camera thing. Alas no… Come to think of it two sensors are starting to act up. Upstairs bedroom and outside. The bedroom sensor used to give me false positives due to a bad power supply. The outdoor one now seems to alert a lot as the shadow of the house grows and … Continue reading RCWL-0516: More outdoor issues with the PIR AM312
Newest build 2018.08.12 “Light switch with extra switches” Currently there is a wall switch which is unused. One staircase light was removed and the other is always on as it’s a ceiling fan with remote. As it stands now there is a blank faceplate covering the switch. I was thinking to put in some httm capacitive switches. (As in pic) Update: The blank faceplate is … Continue reading Reed sensor not working on d8. Nodemcu woes. (BRUH conversion)
BRUH got me into this. BRUH disappeared. Dr ZZs can in to fill the void. The hook up is assisting. BRUH left so I’m leaving too. Yeahnah. I love ya BRUH I can’t thank you enough for your push back into the electronics field. But the truth is the BRUH multisensors sometimes reset or freeze up. I would love to ask you about it alas … Continue reading BRUH to Tasmota conversion.
For the Bruh multisensor, I decided it might be prudent of me to also order some cheap USB power adapters after all if all the parts were in working order I’d have 10 multi-sensors sensors. Now I know not to expect much especially when I found a dual 2.1/1 amp charger for 103JPY. I figured I’d give them a try, as with shipping they would … Continue reading My first hiccup with AliExpress