Always connecting never doing – ESP 2.4.0

New NodeMCU… Flashed Tasmota with the ARDUINO IDE software (to customize the firmware) The NodeMCU would constantly do the following… I tried re-flashing Using another NODEMCU after discovering a dead one Restoring from another Tasmota NodeMCU Etc Nothing worked. Only until I stumbled on this page did I see the solution 13:28:06 MQT: tele/sonoff/LWT = Online (retained)
13:28:06 MQT: cmnd/sonoff/POWER = 
13:29:00 DNS: Initialized
13:29:00 MQT: Attempting … Continue reading Always connecting never doing – ESP 2.4.0

Home power monitoring with PZEM-004 & home assistant for under 30$! Part 2

The physical setup. Once again this is working in proximity to MAINS power. If you’re not comfortable STOP NOW and get professional help. As much as I didn’t want to split this into two pieces it’s becoming far too big for one post. See part 1 The physical setup that I did is as follows SETUP: SHUT OFF THE MAIN BREAKER to the house. Attach … Continue reading Home power monitoring with PZEM-004 & home assistant for under 30$! Part 2